February 11, 2023
Description
This bracket was designed to mount the Philips Hue Play Light Bar onto a VESA 75 / 80 / 100 mounting option. I used the VESA 100 for my Ergotron LX Monitor Arm.
You might need additional screws, nuts and washers for the mounting of bracket. Depending on your VESA mounting option. The original screw for the
I would recommend to use 3 or more perimeters. Print with a lower speed, for example 40 mm/s, to get a more accurate printing. I recommend to print the bracket with 100% Infill. Since different monitors have other mounting options, I lifted the mounting option of the Philips Hue Play Light Bar by 5mm so it does not interfer with the monitor, especially curved monitors, itself. Therefore printing with supports from build plate only is required.
Let me know if there are any kind of problems with the bracket. I will try to help and if neccessary correct the design. I appreciate any kind of feedback to this bracket.
If you like my work and find it really usefull then I would be very happy if you give me a small tip as an appreciation for my work.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Keromida
