VESA 100x100 Mount for Vertically Oriented 3/4 Iron Pipe

See my newer model for a remix of this in a complete project:

https://www.printables.com/model/400720-diy-monitor-pipe-clamp-mount

This is a mount made for a Dell monitor but should work with any VESA 100x100 monitor.  It will attach it to a 3/4 iron pipe oriented veritcally.  The VESA mount uses M5 size screws to secure it to the monitor.  A 1 inch M8 bolt, 2 fender washers, and 1 nuts are used to attach the pipe clamp to the mount.  The pipe clamp is secured to the pipe using two 1 inch m5 bolts and nuts (shorter may also work).   The holes do not have clearance built in so force will be required to drive the bolts through.

Print Settings:

• Material: PETG
• Infill: 50%
• Walls: 5
• Top and Bottom Layers: 4

Summary of hardware required:

• 4 x M5 bolts sized for your monitor
• 1 x 25mm long M8 bolt
• 2 x M8 washers
• 1 x M8 nut
• 2 x 25mm inch long M5 bolts
• 2 x M5 nuts