Trash Walker (large bin)

This is an office under desk waste/recycle bin version of the popular Trash Walker.

Not just resized but reworked to thin the walls down (they were already thick enough at the desktop size) and make for a deeper bin.

I have printed this with both a .4mm nozzle and a .6mm nozzle. It would print well even at .8mm. Note that at .6mm the waste bin will take 24-30 hours to print and uses 960 grams of filament (yes, a whole 1Kg roll).

This is the single trash bin version of the Dual Trash Walker here:
https://www.thingiverse.com/thing:4178661

Print instructions

Unassociated tags: waste basket

Category: Containers Summary

This is an office under desk waste/recycle bin version of the popular Trash Walker.

Not just resized but reworked to thin the walls down (they were already thick enough at the desktop size) and make for a deeper bin.

I have printed this with both a .4mm nozzle and a .6mm nozzle. It would print well even at .8mm. Note that at .6mm the waste bin will take 24-30 hours to print and uses 960 grams of filament (yes, a whole 1Kg roll).

This is the single trash bin version of the Dual Trash Walker here:
https://www.thingiverse.com/thing:4178661

Print Settings

Printer Brand: Creality

Printer: CR-10S

Rafts: No

Supports: Yes

Resolution: .32 (.6mm nozzle)

Infill: 20%

Filament: Any PLA, PETG, Other Any