Zip Tie Mount with screw and/or double-sided tape

Zip Tie Mount with screw and/or double-sided tape

Affix to a wall or surface using the 4mm chamfered hole with a screw. Or use ½" double sided tape. Feeling crazy? Use Both. Fits small or medium sized zip ties. (Zip tie channels are 2mm x 5mm)

Recommended print settings: 0.2mm layer height, 0.4mm nozzle, 20% infill.

There is a .2mm layer that bridges right before the hole starts. That is the reason for the .2mm layer height recommendation.  x1 Prints in ~14min. 

Let me know how this works for your project!