Action camera j-mount for gopro dji action

Was quicker to design, to print than searching and ordering. 

Easy to print.

I suggest ABS but PETG should be good too, just make sure that you dial in print settings to maximum layer adhesion. 

Easiest way to get maximum adhesion is to set nozzle size to 0.5 instead of 0.4, and bit slower print speed to compensate the increased volumetric flow rate. Extruder should be calibrated very close to overextrusion.

Printed with 5 walls, 30% grid infill.

Have a safe ride!

Edit: made several versions, they are more roboust, should be good with PETG.