Coffee Machine Milk Jugs Holder

Just a quick and dirty print to hold some coffee machine jugs so they don't take up ALL the space in the fridge shelf. The left side holds a slightly larger jug to the right because that's what we have (90mm and 80mm jugs).

It is not strong enough to hold a jug full of milk but if you want to keep your jugs cold for when you use them this will do it.

Print instructions

Print this with the back rest for the jugs flat against the print bed and use a 3mm brim for good adhesion. My original version was a bit taller but I had a problem with my extruder cables getting hooked on the print and breaking off (you can see where I just clipped it in the print but I fixed it in the file)