February 16, 2023
Description
There are 3 hooks for use in a Skadis pegboard. Each has its mounting point offset by 5mm to allow two hooks to be used to support 2 uneven ends of a single tool. See the picture of the hammer for an example. This is designed to support the 2.5 TNut connector. To use the M3 mount system simply drill out the inner hole using a 3mm drill.
Any material
6 or so perimeters so you get 100% infill
0.2 layer
paint on some support for the alignment nubs
a 3mf file (from MK3+) is provided which sets support for the 3 different hooks
License:
Creative Commons — Attribution — Noncommercial
8
Crab
