Ender 3 BLTouch Mount

Special features

• The Extruder Fan Cover can be removed independently (no need to also remove the BLTouch mount), thus maintaining the probe Z offset
• Optimized cable placement.
• Small and sturdy design.

Updates 

3 February 2023 - Lowered the mount by 1.5 mm for more optimal BL-Touch height

Part list

• BLTouch-Mount (1x)
• M3n nut (2x)
• M3x8 screw or longer (2x)

Assembly instructions

Step 1 Nut insertion

• Insert the two M3n nuts in the BLTouch-Mount.
• Pull the nuts with a screw to ensure proper insertion.

Step 2 Ender 3 preparation

• Using a wrench and an allen key, unscrew the top left screw enough to slide the BLTouch-Mount in.

Step 3 Mount installation

• Install the BLTouch-Mount by sliding it in to place. 
• Secure it in place by tightening the previously untightened screw. 

Step 4 BLTouch preparation

• Slide the BLTouch wire through the slot in the picture.
• Align the holes on the BLTouch with the ones on the mount.

Step 5 BLTouch installation 

• Secure the BLTouch with the two M3x8 screws. 
• If you encounter any extruder-wobble, adjust the eccentric nut on the bottom wheel with a wrench.

Step 5 Probe offset

• Change the probe X offset to -44.0.
• Change the probe Y offset to -5.0.
• The offsets can also be applied in the printer's configuration.h file (marlin).

Please post a make if you liked the model!