Voron V0.2 Z endstop combined with a lower guard to protect the area around the leadscrew

This is a remix of the V0.1 lower bay guard with the stock V0.2 endstop. I made of course some stealthburner-like adaptions :-)

Integrated supports which will snap away with a tiny bit of force.

It used to be a very tight fit at the left side where the screw is going into the extrusion.
I made the left side a bit longer and cut off some length. 

Depending on if you're still using the V0.1 chain location or the new V0.2 you have to select either the V0_1 or V0_2 variant. 

Please let me know your feedback.