Happy Cloud Lamps - With Casting Shadow Effect

Here is my design of a happy cloud lamp - the cute little light for your toddler! The lamp will cast a shadow of the stars to the ceiling (see pictures).
You won't need anything but an LED strip as additional hardware for this lamp, also the print is relatively easy and won't need any supports.
The cheeks are optional, choose whatever you like more!


 

Note: I changed the .gcode/.3mf from the front cover after I took the pictures to have less shine through at the cloud frame.

Installation guide:

This step is no longer needed dut to a change in design! You only need to glue in the cheeks now if you like!




 

Have fun with your new lamp!

This design is still subject to change so check back again for updates (I already made some changes after taking the pictures so they might differ from the printed version).

Changelog:
09/05/2020: Changed the design so you don't need to glue in the eyes and mouth anymore, they will now directly printed to the backplate.


 

+++++++++++++++++++++++++++++++++++++++++++++++++

If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! 

Happy printing!

Print instructions

Summary:

• Use .3mf files for optimized print settings
• Print as aligned
• No supports needed
• PLA will probably be fine

Files needed:

• cover_rc2.3mf / .stl
• main_rc1.3mf / .stl
• backplate_rc2.3mf / .stl

This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.