February 10, 2023
Description
Edit: Fixed the .gcode file
I got tired of the filament clips that are complicated to put on and are quite bulky especially since I change my spools on my printers very often, so I designed a clamp-like filament clip that attaches on the side of the spool and is easily removed and stored in the same place.
Print Settings:
Material: PETG would be ideal but should work in others as well
Layer Height: 0.2
Walls: 1
Infill: 30% Rectiliniar
Brim: If your print has bad adhesion
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
pops
