February 9, 2023
Description
Found using a spanner difficult to adjust the clutch on the CT100.
Like a lot of people who weld a socket to an old spanner, I took the same approach.
Allows you to get in with the flat head and adjust while pinching tight the clutch nut.
When printing in:
Printed in PLA.
25% infill.
They are a consumable part.
Printing in:
PETG
25% infill.
I haven't had any issues.
They aren't as strong as a socket. They shouldn't be used to “crack” the nut.
License:
Creative Commons — Attribution — Noncommercial
10
AuBuilds
