Michelangelo's Vaporwave Bubble Gum David (NOW WITH SUNGLASSES!)

Printed on an Ender 3 Pro with Supports in Polymaker Polylite Natural PLA with Nailpolish Paints. This would probably turn out even better on a SLA printer than on a FDM, but I don't have one. 

Settings (time = 4 hr 10 min)

• Layer Height - 0.1
• Wall Count  - 5
• Top Surface Layers - 1
• Infill Density - 50%
• Infill Pattern - Cubic Subdivision
• Temp - 200 C
• Build Plate - 50 C
• Speed - 45 mm/s
• Supports Line Distance - 3.0
• Support Z Distance - 0.3
• Use Adaptive Layers - On