February 11, 2023
Description
This is a decorative Star shining with LED Stripes.
I made it out of Wood with a printed Cover of clear PLA glued together with CA glue.
The wooden parts are fixed with pegs made from toothsticks.
I also provided alternative printable Segments that can be fixed together by 5 M2 Screws.
The white LED Strip is usually powered with 12V but I use a 8V power supply for less brightness.
You can use color LEDs or RGB-LEDs instead of white LEDs.
Also you can print the Covers with alternative colored transparent PLA instead of clear PLA.
Category: DecorLicense:
Creative Commons — Attribution — Noncommercial — Share Alike
MegaCadler
