key holder

two-color printing, having only one extruder I had to create 3 gcodes. the logos are 0.2mm thick for them i used 0.1mm layer for the satapa. the body by 0.2mm

I added some stl files which make it easier to print but using 4 gcode.
I also added my gcode in the zip file, keep in mind that I print with an ender 3 and I don't know if they work well on other machines too.
in any case, the gicods must be printed in series without detaching the print, at each change the print pauses and sends an acoustic signal for the change of the thread (color) ( N = dark color B= light color)