Sortimo - Bosch L-boxx with 10mm label pulls

Made a custom cabinet in the shop and wanted some Bosch L-boxx style containers so that I could easily toss them in the L-boxx containers. Tested in the older style for those that might want to know. Each one of these has a 10mm wide space for a label and also doubles as a pull to grab the cube.  I've included the Fusion360 file if you want to edit it for a custom size that might not otherwise fit into an L-boxx.

Designed with a .6 nozzle in mind but it will print with a standard .4 nozzle as well.

Printed on a Prusa MK3S
Prusa Slicer
0.6 nozzle
.3 layer height
No Supports needed
Tested in PLA and PETG
Created in Fusion360

In case someone might want to use them for some other application:
1 Cube is 52mm X 52mm and 60.8mm tall without feet and the foot adds another 2mm.
Other cubes are a multiple of 1 cube so a 1x2 cube is 52mm X 104mm and so on.

Print with the bottom down.
Print Settings

Printer brand:
Prusa

Printer:
I3 MK3S

Rafts:
No

Supports:
No

Resolution:
.3

Infill:
15%