Skadis Bit Holders

The Skadis pegboard, combined with the TNUT innovation is a highly effective method to  attach holders. This holder accommodates ¼ inch bits in a removable tray that can be carried to your workbench. The first holds an 8 piece HEX head driver set. The set shown in the picture was purchased on AliExpress for about $10 and ranges from 1.5 to 8mm. Each bit is labelled (in my world 2+ means 2.5mm). The second holder has room for 10 ‘normal’ screwdriver bits, such as philips, robertson, torx, etc. Purely for aesthetics, the bottom of the holder meshes with the mount.

I've included the 3mf files from PrusaSlicer for MK3S+ so you can see the orientation and settings for support. I printed from PETG @0.3 layer, 4 perimeters. I used some painted on support for the alignment guides and some support under the bottom of the bit holder block. Orient the parts as shown in the photos. The hex bit holder block is designed so you can print a different color for the last 2 top layers, for readability. 

The mounting holes accept the 2.5mm TNut lock. If you wish to use the Direct Screw in T-Nuts by @rynn, simply ream out the 2 mounting holes with a 3mm drill bit. The countersink will accept a 3mm socket or button head screw.