Require at least 260 x 260 mm bed, as the case are printed in 1 main pieces. hardware required:
- 1x ITX Motherboard with at least 6 port SATA
- 6x SATA and Power Combined Cable
- 1x FlexATX Power Supply
- 2x Slim 12cm Fan (and its Fan guard so the cable does not hit the fan blades)
- 26x m3 Screw - 6mm
- 26x m3 Brass Insert
- 1x Power switch - Round 16mm diameter
- Require about 1.2 - 1.5 KG of Filament depending on your setting
Tools Required:
- Soldering Iron to insert the brass insert for screws
- Hot Glue Gun to glue the SATA Cable for the backplane
License:
Creative Commons — Attribution — Noncommercial
Anthonny
