February 12, 2023
Description
// February 12th 2023 - NEW //
I'm not sure the notches are that useful. There is now a version without notches.
//
// January 19th 2023 - NEW //
I now share a version that embeds a "classic" spatula. There is a model where the spatula part is hollow and another one where it is solid. The hollow one is lighter but will need support.
And I am currently testing PLA+ as it seems like a good alternative to PETG.
//
I did not invent this nice cone-shaped concept. I downloaded a few and found this type of tool quite handy. This is my version. Inspired by lots of other models but a bit singular.
My design features notches around the outer perimeter, hopefully helping it be more efficient at attacking the ice.
It fits in the palm of the hand and does not require any support to be printed.
Printed in PETG for more robustness and weather endurance.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament: Prusament PETG White
Notes:
The version with no spatula does not need support. But the ones with a spatula do need support, just under the spatula because the slope is steep.
License:
Creative Commons — Attribution
9
Adamow
