Retro bedside lamp hearts

Hello everyone,

here are the files of a retro bedside lamp for a light bulb with an E27 socket. The top cover has hearts on it and make a nice pattern when projected. This can also be easily rebuilt/modified with customization for example (STEP file of the cover is attached). Because of heat generation, please use only one LED as illuminant. I used a 4.5 W LED with a transmission power of 25 W, because a higher power was too bright for me. Also, the STL file of the cover is available in 1 mm and 3 mm thickness. Again, I opted for 3 mm to get more contrast. The socket used has an integrated strain relief, and the cable can also be placed in the lower cavity and is protected by the passage. So you know which socket/cable to use, I have attached a 2D sketch with the corresponding dimensions.

No supports

Components can be printed simultaneously

Additional components: Socket, illuminant

Printer: Original Prusa i3 MK3S+

Nozzle diameter: 0,4 mm

Material: PLA

Print Settings: 0,2 mm QUALITY

Perimeters: 2

Solid layer: 8

Bottom layer: 8

Infill: Gyroid 10 %

Extrusion width first layer: 0,6 mm

Sliced Info:

Used Filament: 198,41 g

Printing time: 18 h 11 m