February 13, 2023
Description
This is a remix of an old straight extender that was taken down from the web by the original author. Using Blender, I've curved it inwards and then added a slight bended lip at the top, so that the joystick points a litte bit outwards back towards the center again, giving a little more center weight.
It's about 9cm in height total. So if you have a base right in front of your seat, it fits perfectly.
Here's my rig with an older model that I made: https://imgur.com/a/DhUR6ft
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1
Filament:
PLA PLA How I Designed This ===================
Remix
This is a remix of an old extender that was taken down from the web. I've curved it inwards and added a slight bended lip at the top, so that the joystick points a litte bit outwards back towards the center again, giving a little more center weight. I used Blender to make the adjustments. I also removed excessive noise that often caused the lose part to get really stuck to the main shaft.
Category: 3D Printer Accessories
License:
Creative Commons — Attribution