KA-BAR Bed Scraping Tool

I made this goofy KA-BAR knife design, but I like practical prints.   So I figured I'd put bed scraper on the end of it.    Full Tang construction.   It fits with a bit of friction but I recommend CV glue.   I printed everything with 6 top and bottom layers and 3 parameters.   For the blade I recommend 60% infill.   You want it pretty ridged for sticky prints.   The handle can be less like 10-15% but I recommend aligning the seems.   I posted my sliced files for the MK3s+.   Post your makes.   Use wild colors.   Happy Printing.    

I printed the blade and handle using Fremover PLA+ and Inland PLA Pro respectively.   I designed it for a easy fit.    If you have issue just use a steel knife blade and scrap perpendicularly against the four corners of the pla blade's tang.   Shave off a bit and try fitting again.    This did the trick for me.  

If you like the KA-BAR see the below link for a Toy/Toothpaste squeezer I also made.

https://www.printables.com/model/394558-ka-bar-toy-knife-and-toothpaste-squeezer-squeegee

Updated handle files