This support frame will help you wash and dry your Squooshi reusable food pouch. We absolutely love these, but find that they need a bit of help to get clean in the dishwasher, and to dry fully before getting put away. I hope you find this useful, too!
Design features
- Minimalist approach to avoid interference with cleaning and drying
- Tine channel to easily load into a dishwasher
- Optional stand to add a little height while drying for better air circulation on a flat surface (i.e., not a drying rack)
Printing instructions
- Print the main piece and the crossbar as-oriented in the .stl file (flat on the print bed).
- Optionally print the stand, also as-oriented in the .stl file.
- See the food safety notes, below.
Assembly instructions
- The cross bracket will snap into the main piece at a perpendicular angle.
Usage instructions
- Follow all cleaning instructions provided by the manufacturer of your food pouch.
- Insert the support from the bottom of the food pouch until the hook is fully protruding from the top.
- Slide the hook over the rim of the top and push it down in place.
- Place in the dishwasher, optionally sliding the support over a tine.
- To dry, just leave it standing.
- Make sure the areas where the hook and support made contact are clean, too.
Food safety notes
Other notes
- The design is fully parameterized (I use OpenSCAD). If you'd like a simple modification, such as thickness, width, length, etc., please send me a message and I'll be happy to help.
Adam
