September 2, 2020
Description
A 3-position, ¼″ hex bit holder for Milwaukee's M12 Fuel line of tools. Mounts using the stock clip mount--either in place of, or on the other side of, the stock clip.
A right and left STL is provided to fit either side or the orientation of your choice.
Use the existing mount screws or a M2.5×6 pan- or socket-head screw.
Just about any settings will work fine. Print tab-down with the bit recesses oriented vertically. The 3mf file includes both STLs oriented correctly--delete the part you don't need.
Even PLA produces a usable part. More perimeters lead to a stronger part--3 is sufficient, but 4 would probably be stronger.
Supports are minimal and recommended unless your printer is the king of overhangs.
License:
Creative Commons — Attribution — Noncommercial
9
Zanfar
