Cordless screwdriver Parkside PBSA 12V D4 - motor casing

This is a simple case for the motor of the Parkside PBSA 12V screwdriver motor. I used them as a cheap motor for a ball screw.

The clutch of the motor has to be turned to the "drill" position before the case can be closed.

I added the motor STL as reference.

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: unknown PLA Post-Printing =============

The tolerances are very tight. So be careful when you fit the motor into the case. It might be necessary to rework some of the inner faces for a better fit, but this depends on the motor itself.

Category: DIY