Anycubic Kossel Yet Another Toolbox (2 part design)

This is just another tool holder or toolbox for the Anycubic Kossel. I searched for an easy to print solution using as little material as necessary for a toolbox that can be mounted to the frame and does not necessarily sit on top of the stock power supply. As I wasn't happy with anything I found I designed this holder.

The holder is a two part design, as you are able to use part "Toolbox Oben" on its own or you print one of the two bottom parts additionally.

It is easy to print. Use M3 screws to connect both parts and mount it to the 2020. You can add a little bit of super glue if you wish, but it isn't necessary.

Side note: the idea to design the second bottom part came from here: https://www.thingiverse.com/thing:4577997

So technically it is not a remix but a design reference. Thanks to tonkugel at this point :-)

Print Settings

Printer Brand:

Anycubic

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament: DasFilament PETG Grey

Notes:

How I Designed This ===================

Made in Fusion 360.

Category: 3D Printer Accessories