Gift and Storage Box for Keychain Whistle Set

This beautiful gift and storage box holds my complete keychain whistle set. Please download the whistle set here.

There are 2 versions of this box - one with a descriptive icon on the top and a slightly thinner one without that icon.

If you like this design, please leave a Like. If not - please tell me what's wrong with it. Makes are also welcome.

How to print:

Use a line width of 0.4 mm and a layer height of 0.2 mm, 4 top layers and 4 bottom layers. Print slowly to achieve sharp edges.

If the hinge is too tight, adjust "XY Size Compensation" in PrusaSlicer (or "Horizontal Expansion" in Cura) by 2 or 3 hundredths of a millimeter. Reducing the flow can also help.

If you want a multicolor print as in the picture above,  change filament at the 4th layer.

Please also check out my growing Whistle Collection …