February 15, 2023
Description
This bird feeder / bath was designed to be stuck to a window using Nano tape.
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
25
Filament:
Whatever you like PETG / ASA or reflective PLA might work
Notes:
Designed to print without support. Should use a decent infill amount to ensure the stand pegs are strong enough, or perhaps just use 3 walls.
Keep in mind, if printed in PLA, it will likely melt in the sun, especially if it's dark PLA, or painted to look like wood like I did with mine :) Maybe printing in white PLA would be ok, but try at your own risk. ASA or PETG would be better.License:
Creative Commons — Attribution — Noncommercial
Space Warp Studio
