February 15, 2023
Description
A bird nesting box designed to be stuck on a window using Nano tape.
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
25
Filament:
Any ASA / PETG (White PLA might be ok)
Notes:
Designed to print without support. Should use a decent infill amount to ensure the stand peg is strong enough, or perhaps just use 3 walls.
Keep in mind, if printed in PLA, it will likely melt in the sun (like mine did), especially if it's dark PLA, or painted to look like wood like I did. Maybe printing in white PLA would be ok, but try at your own risk. ASA or PETG would be better.Stick it to a window using nano tape on the 7 tabs around the box, should be pretty strong. I also added some reflective one way foil I bought on Amazon, in the hope the birds wouldn't be able to see me.
The box didn't work for us (at least not before it melted) but then we have a lot of movement in the room where we placed it. If you have a more quiet window area you might have more luck!
License:
Creative Commons — Attribution — Noncommercial
Space Warp Studio
