Camera Shoulder Rig

All the files needed to make the shoulder rig from my video:

Hardware used:

• 7 M6x25 Hex Bolts
• 7 M6 Wingnuts
• 7 M6 Washers
• 1 ¼" Camera mounting screw
• A piece of cork or foam rubber pad
• 2 50-60cm 16mm Aluminium tube

Print 2 handles and one of every other part.90deg and 115deg are angle jigs only used to mark the cut angles for the handheld rig. Strap Mount is an optional piece that can be used to fix counterweigths or straps to balance out the camera.