Neewer LED Panel Bracket

This is a bracket for the Neewer LED panel light which allows the lamp to be tilted further down. Due to the diffuser or the foldable shutters, a downward tilt is not possible. This angle piece enables that.

You need for mounting 2 M5x20 screws and 2 nuts, even better nyloc nuts. 
I recommend to print the bracket from a sturdy filament like PC to get a high stability. The model should be printed with at least 5 perimeters and 30% infill.
I do not recommend PLA, because it is not resistant to permanent pressure.

If you like this project, check out my other designs too!