Index Card Dividers

This is a set of index card dividers for the standard 3x5, 4x6 & 5x8" sizes.  The tab sticks out 10mm from the top.  There is a version for ⅓ width tabs and ½ width tabs.

Note: The file for blank cards with left or right tabs are the same since they are just mirrored.

I provided some 3x5 cards pre-labeled with common recipe categories.  Print them with the text facing away from the print bed.  You can either change filament at the appropriate layer or use paint to color the extruded label text.

I provided the CAD file if you want to make a different label.  The file is already set up for them, just change the text then extrude at least one layer height.

The card sizes are defined by parameter variables in the CAD file.  You can change it to make other sizes if needed.

Print Settings

Printer: Ender 3 Pro w/ direct drive
Rafts: No
Supports: No, print flat on print surface
Resolution: 0.16-0.2mm
Infill: Not applicable due to thickness
Shells: 2+
Material: PLA/PETG (Anything will work)