Shower bottle holder tray

Moved in at a new place. No shower bottle holder. A perfect opportunity for a new design/print :)

The holder snaps on a Ø23 mm rod. Its a tight fit so you need to apply a lot of pressure. Its more easy to slide it on if you sort of slide on the corner first instead of directly on.
The tray dimensions is 74x80x38 mm. Enough room for 2 bottles of the type you see on the picture.

There are holes at the bottom to let out the water.

I printed in PLA and the print seems to hold up just fine here about 1.5 month later. Its gotten a little looser on the rod but still works just fine.

Print instructions

Prints without supports.