Phrozen Transform Vat Cover

Simple cover for a Phrozen Transform vat with a folding centre line so it can slide in between the handles. Made fairly thin to reduce print time however if you would like it thicker, you should be able to resize it on the Z axis by 5mm or so without causing fitment issues with the handles.

EDIT- I have included a design to sit over the vat while in the printer with cutouts for the mounting bolts/nuts. Please download the 2.0 file for this version. I have not printed it yet so let me know if it needs any tweaks.

Test print in the photos was just some PLA I wanted to use up but PETG would probably be more suitable due to the bending seam. Can always use a strip of wide tape if it starts to split or if you need to print it in two pieces on a smaller printer.