FPV Drone frame

3D printed FPV drone frame.

Needed components :

• Motors (H1806 2400KV RCX)
• Flight controller (Flip32+)
• ESCs x4
• Radio receiver (Frsky X8R)
• Props x4 (RB-Tmo-114)

Fasteners :

      Flight controller

• x4 M2.6 | 5mm screw (nylon)
• x4 M2.6 nuts (nylon)
• x4 M2.6 standoff (nylon)

      Motors

• x16 M2 | 6mm screw

      Standoff screw

• x12 M3 | 6mm screw

      Arms

• 6/32 | ¾ bolts
• 6/32 nuts

Instructions :

• 0.15 layer height
• 20 % Gyroid infill
• PLA, ABS, PETG

Special instructions for the arms : 

• 8 perimeter
• 8 top and bottom layers
• 100 % infill where shown in the third picture

Notes : 

• The 3D printed standoff can be replaced with off the shelf one of M3 | 35 mm