Decorative Bracelet

A decorative bracelet that can be printed in four colors separately and assembled with 3d printed gems inlaid. Print all of the files listed in this project the number of times that the file specifies, and ensure that supports are activated. For best quality, print at a low layer height (0.1-ish). To assemble the parts, first take one of the Color 4 pieces and insert the pieces from colors 1 and 2 into it, making sure to alternate between them as shown in the picture below. 

Repeat with the other Color 4 piece, making sure that when the two fit together they maintain the pattern of alternating color and direction of the diamonds. 

Using glue, take the Color 3 piece and press it into one of the assemblies from before, aligning the balls with the indent.

Repeat, putting the other assembly on the open side of the Color 3 piece. Again make sure that the pattern of color and diamond direction continues, and the bracelet is done. Happy printing!