NeoGeo AES arcade stick wall mount

Wall mounts for the NeoGeo arcade stick. I attached mine to the side of an IKEA Kallax bookshelf. 

NOTE: The STL file has the mount standing vertically, make sure you print it on its side.

You need to print (2) of these on the side (no support required). 

IMPORTANT: if you have rubber pads under your arcade stick like I do make sure you space these mounts so they are “on the inside”, between both rubber pads. Mine are spaced where the distance from the center of one mount to the other is 7 9/16" (I used the center of the holes as a reference). PLEASE VERIFY YOUR MEASUREMENTS, or hold your arcade stick upside down to make sure the rubber pads are on the outside of the wall mounts (see picture for example).

I used regular construction phillips screws 3/4in #6 (see picture). I think I predrilled the bookshelf with a tiny drill bit before attaching the mounts but I can't remember for sure.

This is not a tight fit as I didn't want the mounts to scratch the controller. The cable can be tucked away behind the controller when stored.

Feel free to ask if you have any questions or feedback. Now go play some metal slug…

I also have a version of these mounts for a SEGA Dreamcast arcade stick HKT-7300: https://www.printables.com/model/402772-sega-dreamcast-arcade-stick-hkt-7300-wall-mount