September 7, 2020
Description
A case to use a Raspberry pi 3B+ with Octopi on 3030-beams (Prusa mk3 etc.).
An optional cable guide for the pi-cam cable.
No screws needed. Everything snaps together..
There are holes to attach the Raspberry to the bottom part using pieces of filament.
Use 4 pcs of 1.75 mm PETG filament that you guide through the holes and bend them slightly on each side.
Works better than I could hope for.
The bottom part needs support from buildplate only.
Cable guide and top prints without supports.
License:
Creative Commons — Attribution
7
Zahg
