SEGA Dreamcast arcade stick HKT-7300 wall mount V2

EDIT 01/11/24: V2 version is here. Few changes compared to V1:

• reduced weight/dimensions by roughly 50% (V1 weighted at 72.7grs, V2 at 37.2grs with 15% infill)
• larger access holes (10mm) to more easily access the screws holes
• increased rigidity around the front hook/elbow area
• slightly modified the contact surfaces to better match the arcade stick

Feel free to comment if you have any feedback! Thank you all.

Wall mounts for the SEGA Dreamcast arcade stick HKT-7300. I attached mine to the side of an IKEA Kallax bookshelf. 

NOTE: printed on their side with PLA, 0.2mm and 15% infill. No support required.

IMPORTANT: if you have rubber pads under your arcade stick like I do, make sure you space the mounts so the rubber pads are inside each mount or else the arcade stick will tilt forward.

I used regular construction Philips screws 3/4in #6 (see picture). 

The cable can be tucked away behind the controller when stored.

Feel free to ask if you have any questions or feedback. Now go play some Capcom vs. SNK…

I also have a version of these mounts for a NeoGeo AES arcade stick: https://www.printables.com/model/402747-neogeo-aes-arcade-stick-wall-mount

and another version for the SEGA Saturn Virtua stick:
https://www.printables.com/model/623254-sega-saturn-virtua-stick-arcade-controller-hss-013