Lidl Parkside Battery 20V XT60 Adapter

Hardware:

• 4x M3x8mm either sockethead or countersunk screw work.
• 2x Red spade connectors
• small length of wire or cable
• 2part epoxy or other glue
• XT-60 Connector (the one I used: https://www.christians-shop.de/XT60-Connector-Bullet-Hochstromstecker-Set-fuer-RC-LiPo-Akku)

Top: 0.2mm with varible layerheight

Bottom: 0.2mm layerheight

I printed them in PETG but I see no problem in printing them in PLA.

I hope the pictures are explanation enough if not I'm happy to answer questions just leave a comment.

Happy printing :)