Roof for truefruits bird feeder

I like the TrueFruits Birdfeeder, but also the pigeons like it. So i wanted to make a hut for it to keep the pigeons away to make place for smaller birds.

The hut clips into the existing model and has a 22mm hole, which should fit the smaller birds. 

There are two versions, one with a hole, one with a cutout.

Hopefully it will work. Print on the roof. Printed in my case with a 0.8mm nozzle and 3DJake clear PETG.

UPDATE 27.02.2023:

I added TF_Birdfeeder_Hut_Door_anchor, this is the Door version with a larger hook which can be better attached with a rubberband to keep the pigeons from knocking of the hut.