September 10, 2020
Description
This is my version of the Prusa Mini.
I tried to make an overall smooth design with integrated filament sensor, E3D V6 and without any visible wires.
My Prusa Mini Clone was not cheaper than the original I just designed it for fun.
The inner parts of the Filament Sensor you can print the originals from the MK3S aswellas the Filament door.
BOM (may not be complete):
1x E3D V6 Hotend
1x Prusa I3 MK3s Filament sensor set
1x Inductive Sensor 4mm
1x Prusa Mini Y-Carriage
1x Prusa Mini Heated Bed
1x Prusa Mini Flex Sheet
1x Prusa Mini PSU ( https://www.distrelec.ch/de/netzteil-24v-67a-160w-mean-well-gst160a24-r7b/p/30042738 )
1x Duet Wifi
2x 30x30x10 5v Fan ( https://www.distrelec.ch/de/axial-fan-dc-30x30x10mm-5v-3m-sunon-mc30100v1-000u-a99/p/15413488)
1x Powerswitch
4x Nema 17 (length max. 38mm)
5x LM8UU Bearings
2x LM8LUU Bearings
1x 50mm Riadial Fan
1x Bondtech Gear Set
2x 16 Tooth Pulley
2x 16 Tooth Idler (ID Ø3mm)
Rods (all Ø8mm):
2x 283mm
2x 255mm
2x 320mm
3030 Extrusion:
2x 265mm
1x 285mm
Layerheight: 0.2mm
Support: Sometimes
Nozzle: 0.4mm
Infill: 30%
Material: PLA
License:
Creative Commons — Attribution — Noncommercial
7
Kakadu
