September 7, 2023
Description
Use 2x M3x6 screws or similar length to secure the motor to the stand. The hole depth for the bolt is 30mm, so it is possible to use a tapping tool and pre-create the thread.
The lettering can be coloured with permanent marker or any other way.
I have attached the gcode showing all the settings as I printed the stands for my own engines.
I created the lettering based on Traxxas templates, who own the trademarks and proprietary rights to them.
Used filament by me: Prusament PLA Silver
License:
Creative Commons — Attribution
9
ByPS128
