Vise for Watches

Recommendations:

• The parts are oriented the right way for printing.
• The sliding jaw has two files, the Sliding Jaw (hole) part has the cutout to insert the M5 nut post printing and the file Sliding Jaw (pause) has to be paused at 7.2mm height to insert the nut.
• The screw hole on the Sliding Jaw is partially covered to aid with bridging which can be removed by either a blade or by screwing a bolt through the nut.
• The Sliding Jaw has a 0.2mm clearance with the Fixed jaw. If it is too tight, the part can be resized and printed for the desired feel.
• The M5 screw can be either glued or press fitted to the Knob.
• A minimum of 3 perimeters and 25% infill is recommended.

Required Hardware:

• M5x70mm Hex head or Socket head screw (1).
• M5 Nut (1)
• Spring: ID min - 5.5mm, length - 45mm.