August 2, 2025
Description
Display stand for your TRX 2.5R engine will give unused motor a new lease of life on your shelf or in your display case.
Used filament by me: Prusament PLA Silver
Use 2x M3x6 screws or similar length to secure the motor to the stand.
The hole depth for the bolt is 30mm.
The lettering can be coloured with permanent marker or any other way.
Attached gcode shows all the settings used to print the stands for my own engines.
Lettering is based on Traxxas templates, who own the trademarks and proprietary rights to them.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
ByPS128
