February 22, 2023
Description
A functioning face mask holder or even for any hook extender for any occasion.
Print in 2 parts , hook and wall plate. Secure the wall plate with 3M double sided tape.
Print with 30-40% infill support.
PLA will work.
Hook and wall plate are very tight fit. So once slot in, it will be very hard to remove without breaking the parts.
Use a vice or a mallet to force in if needed.
The published STL do not have any initial as observed on the images of my print.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
30
Filament: PLA PLA Blue
Notes:
Print with tight fit for the extended hook and wall slot pin.
License:
Creative Commons — Attribution
9
yong3dprint
