February 22, 2023
Description
Inspired and Modified from https://www.thingiverse.com/thing:2886101 P2 Camera holder.
Heard about very tight tolerances and hard to remove once installed and difference PCB camera board width might damaged versus the original print. I measured the STL file and indeed too tight about 2mm narrower with my version of Pi camera board. Adjust the tolerance and also the sliding chamfer thinner a bit by 2mm and the end results is still fit and yet can slide out and detached easily but still lock in place snugly. Fit the PCB camera board easier. Added a LED hole for camera turn on status.
Printing:
Use Ender 3V2, no need Brim or Raft or support.
Standard quality.
PLA. 200C, Bed 60C.
Normal speed.
Use about 2m of filament.
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10
Filament: Any PLA Brand PLA White How I Designed This ===================
Using Fusion 360 CAD and Modified for tolerances with Pi Camera V1/V2
Measure the Thingiverse Pi camera holder from https://www.thingiverse.com/thing:2886101 using Fusion360 and compare with PCB camera board dimension using a Vernier caliper.
Check for tolerances and adjust so that it fits your printer tolerance, your camera board.
Pi Camera V1/V2 with LED hole and better tolerance for opening and closing the front/back cover.
LED Hole for Camera Status if you print in dark color. Light color should be translucent.
Easy fit PI camera with the Camera holder.
License:
Creative Commons — Attribution
9
yong3dprint
