February 22, 2023
Description
The fastest way to updrade your CR-3040PRO to an Hemera bowden extruder.
Only hardware needed is the E3D Hemera XS Bowden kit. all screws are either reuse from original mount or they come with the Hemera kit.
Model should be printed with rather thick walls and 0,25 mm layerheight.
My bracket was printed with 4 perimeters and 8 top/bottom layers, making all walls 2mm thick.
Infill: 20%
Material: PETG, ASA, alike.
Printtime: 30-40 min.
License:
Creative Commons — Attribution — Noncommercial
7
Glenn Felthaus
