This is an small ice scooper I designed to be printed in vase mode to eliminate the z-seam. 3mf file is for the Bambu Lab X1C. I also attached the STL, STP, and f3d file for easy editing/remixing.
Print Settings
- Print in PETG. While it would likely not get approved as Food Safe by regulations, PETG is likely the most common “Food Safe” material. This in combination with spiral vase mode & removing contaminates from print operation help. Print & use at own risk.
- 0.25mm layer height
- 0.999mm extrusion width
- Vase Mode - 0.4mm Nozzle
- 10mm brim
- 5mm/s^3 maximum print speed (helps to prevent distortion at handle due to short layer times)
Brandon Raineri
