February 23, 2023
Description
This is a remix of PjotrStrog's version of the Mob dryer for radiators.
I used his clamps wich hold the mob and connected them to a base. The base is held onto the radiator with two clamps.
To mount the brackets you need 2x M4x6mm countersunk screws.
Printer: Ender 3 Pro
Filament: PLA (DasFilament.de)
Speed: 60/120mm/s
Infill: 15%
Wall Lines: 3
Top/Bottom Layer: 4
License:
Creative Commons — Attribution — Noncommercial
René Petersen
